#HP ILO 4 RESTART ILO INTERFACE MANUAL#
#HP ILO 4 RESTART ILO INTERFACE UPGRADE#

The iLO icon is usually set correctly after a server restart.ДЎ.В Call up the iLO4В web interface and log in with your individual login details. You can select the iLO icon at the end of the process if you have previously installed the extended iLO license on the server.

#HP ILO 4 RESTART ILO INTERFACE UPGRADE#

If the network settings are changed or a firmware upgrade is installed, iLO4В may be reset automatically. Note:В Restarting iLO4 via the web interface does not change the configuration, only completes ongoing firmware upgrades and terminates active connections to iLO4. iLO4 restart via the web interface without configuration changes: Sample sticker with the login data on the server chassis: These are typically located on a sticker on the server chassis. After the process you can log in the iLO4 interface with the default login details.

iLO4В is resetting, this process will take a while. Confirm the next message again with the 'Enter' key.Д¤. Navigate with your keyboard in the overview to the tab 'File' and then to 'Set Defaults' to set iLO4 to factory defaults and confirm the operation 'factory defaults' with the F10 function key. After powering on the server, let your device continue booting until you see the message 'iLO 4 Standard press (F8) to configure'. Note: This method deletes all activated licenses and user data!ДЎ.В Connect your server to the power source and start it by pressing the power button on the front panel.Дў. Reset iLO4В to factory defaults during boot process via pressing F8-key:

#HP ILO 4 RESTART ILO INTERFACE MANUAL#

The manual is suitable for HP server models such as: ProLiant DL160 Gen8, ProLiant Dе…ѓ60p Gen8, ProLiant Dе…ѓ60e Gen8, ProLiant Dе…ѓ80p Gen8, ProLiant Dе…ѓ80e Gen8,В ProLiant Dе…ѓ85p Gen8, ProLiant DL560 Gen8,В ProLiant DL580 Gen8, ProLiant MicroServer Gen8, ProLiant Mе…ѓ50p Gen8, ProLiant Mе…ѓ50e Gen8, ProLiant Mе…ѓ10e Gen8, ProLiant Mе…ѓ10e Gen8 v2, ProLiant DL20 Gen9, ProLiant DL60 Gen9, ProLiant DL80 Gen9, ProLiant DL120 Gen9, ProLiant DL160 Gen9, ProLiant DL180 Gen9, ProLiant Dе…ѓ60 Gen9, ProLiant Dе…ѓ80 Gen9, ProLiant DL560 Gen9, ProLiant DL580 Gen9, ProLiant Mе…ѓ0 Gen9, ProLiant ML110 Gen9, ProLiant Mе…ѓ50 Gen9. Resetting iLO4 to the default settings may be necessary, for example, if you want to disable the Federal Information Processing Standard (FIPS) mode or if you need to reset all settings. You want to reset your iLO4? Below you will find instructions for resetting the iLO4 interface to the factory default. How do I reset the iLO4 interface on a HP server?

Hp ilo 4 restart ilo interface